LBL Lighting Juniper SF - Manual

Installation Instructions for
Juniper
1.0 LF229OPSC2D100
980JUNPRSP
Install the Fixture
1
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Pull the clear cord out of the canopy.
Remove the two screws on the metal strain relief and remove
it from the aircraft cable.
Push the tab down on cable grip and pull out the aircraft cable.
CANOPY
AIRCRAFT CABLE
CLEAR CORD
TAB
METAL STRAIN RELIEF
Loosen the cap from the cable grip to remove the crossbar.
CABLE GRIP
CAP
Loosen to remove the nut and cable grip from the crossbar.
CANOPY
CABLE GRIP
NUT
CROSSBAR
CROSSBAR
Suspension
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
11
4
2
1B
2
3
1C
5
3
1