LBL Lighting Akari P - Manual

Installation Instructions for
Akari Pendant
980AKARIP
Suspension
1.0
LP797_2D
Assemble the Fixture
Use 120 volt MAX 75 Watt
Type A19 Medium Base Lamp.
Screw the new lamp into the socket.
1
1A
1
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
C AUTION:To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to the
fixture.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SOCKET
LAMP