beautypg.com

Important safety instuctions, Before you begin, Important safety instruction – Siemens 30inc Electric Cooktop User Manual

Page 3: Tools and parts needed

background image

3

d

IMPORTANT SAFETY INSTUCTIONS

READ AND SAVE THESE INSTRUCTIONS

LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE AFTER INSTALLATION IS

COMPLETE.

SAVE FOR THE LOCAL INSPECTOR'S USE.

d WARNING: Improper installation, adjustment, alteration, service or maintenance

can cause injury or property damage. Refer to this manual. For assistance or

additional information consult a qualified installer, service agency, or manufacturer.
Have the installer show you the location of the circuit breaker or fuse. Mark it for

easy reference.

Be sure your appliance is properly installed and grounded by a qualified technician.

Never modify or alter the construction of the appliance. For example, do not remove

leveling legs, panels, wire covers or antiĆtip brackets/screws.

Remove all tape and packaging before using the appliance. Destroy the packaging

after unpacking the appliance. Never allow children to play with packaging material.

Before you plug in an electrical cord, be sure all controls are in the OFF position.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet

storage space located above the surface units should be avoided. If cabinet storage

is to be provided, the risk can be reduced by installing a range hood that projects

horizontally a minimum of 5 inches (12.7 cm) beyond the bottom of the cabinet.

This appliance has been tested in accordance with ANSI/UL 858 Standard for

Safety for Household Electric Ranges and CAN/CSA-22.2 No.61 National Standard

of Canada for Household Cooking Ranges. It is the responsibility of the owner and

installer to determine if additional requirements and standards apply in specific

installations.

Before you begin

1.

Philips head screwdriver

2.

Pencil

3.

Drill with 1/4  bit

4.

Jigsaw

5.

Tape measure

Additional materials may be necessary for installation in solid surface countertops.

Contact the countertop manufactor.

INSTALLER:

IMPORTANT:

Important safety

instruction

Equipment and usage safety

requirements

Tools and parts needed

Note: