Siemens EA125501 - Manual (Page 19)

2. Tighten the grounding clip (green and yellow cable) of
the hob to the clip on the oven or control module.
3. Connect the various hotplate plugs into the
correspondingsockets. The colour marked on the
cable must match the colour of the dot next to the
socket.
4. Fit the oven or control module in place, taking care
not to damage any cables.
Note: Once installed, if the hob does not work, check the
main supply fuses. If it still does not work, call an
authorised technician.
Removal of cooking hob
1. Switch off the power supply to the oven. Always
switch off the power supply before disconnecting the
grounding clip.
2. Disconnect the grounding clip (green and yellow
cable).
3. The oven is disassembled in the reverse order to
assembly.
18