beautypg.com

Taking out the humidity filter, Remove telescopic rails, Installing telescopic rails – Siemens KI27FP60 User Manual

Page 30: Odours, Light (led), Tips for saving energy, If required, use an insulating plate, Open the appliance as briefly as possible

background image

en

30

Taking out the humidity filter

Fig.

1/18

The humidity filter over the humidity

container can be taken out for cleaning.

To do this, first take out the humidity

container and pull out the humidity filter.

Lift off the filter cover, Fig.

*, and take

out the filter. Clean in lukewarm water,

leave to dry and re-assemble.
Remove telescopic rails

Fig.

,

1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear

pin.

4. Push telescopic rail together, push

backwards above the rear pin

and disengage.

Installing telescopic rails
1. Place the extended telescopic

rail on the front pin.

2. Pull the telescopic rail forwards

slightly until it engages.

3. Place telescopic rail on the rear pin.
4. Push lock backwards.

Odours

If you experience unpleasant odours:

1. Switch off the appliance with the

On/Off button. Fig.

1/6.

2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning

the appliance”).

4. Clean all packages.
5. Seal strong smelling food in order

to avoid odours from forming.

6. Switch the appliance on again.

7. Store food in the appliance.
8. Check whether the formation

of odours is still occuring after

24 hours.

9. Change odour filter, Fig.

+.

The odour filter is situated behind

the upper “cool-fresh” container.

Replacement filters are available from

your customer service.

Light (LED)

Your appliance features a maintenance-

free LED light.
These lights may be repaired

by customer service or authorised

technicians only.

Tips for saving energy

Install the appliance in a dry, well

ventilated room! The appliance should

not be installed in direct sunlight

or near a heat source (e.g. radiator,

cooker).
If required, use an insulating plate.

Allow warm food and drinks to cool

down before placing in the appliance.

Thaw frozen food in the refrigerator

compartment and use the low

temperature of the frozen food to cool

refrigerated food.

Open the appliance as briefly as

possible.

To prevent increased power

consumption, occasionally clean

the ventilation opening with a paint

brush or vacuum cleaner.

The arrangement of the fittings does

not affect the energy rating of the

appliance.