Videotec EXH - Manual (Page 14)

EN - English - I
nstruc
tions manual
12
8.2 Spare parts
j To order the spare parts it is necessary to
provide the serial number of the product on
which the intervention is to be carried out
([email protected]).
8.3 Repairs
j For any other maintenance intervention the
housing must be sent to VIDEOTEC, subject
to a request for return authorisation
([email protected]).
9 Disposal of waste
materials
n This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
the world.
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
• Opening the housing to change the camera:
Check the condition of the back cover gasket of
the housing; if it needs changing use only the one
supplied with the housing or, failing that, use only
VIDEOTEC original spare parts ("6.2.2 Changing the
back cover gasket", page 10).
8.1.2 Extraordinary (to be done only
under particular circumstances)
• Changing the front unit with glass (or the glass
protection unit when present).
• Changing the inner slide unit with heater wiring
and electrical connection board, using the
appropriate spare part for versions with or without
the glass protection device.
• Hazardous wear or damage to cables.
• Camera or lens failure.
• Explosion in or near the housing.
• Any other situation in which the housing has to be
opened.
h For damage to any parts that are not
indicated above, repair or replacement
must be done by VIDEOTEC.
h Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
h The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
and from installation and maintenance/
repairs performed by non-authorised, non-
skilled personnel.
j In all such circumstances, the housing
should be sent to the workshop for the
necessary repairs or maintenance.