Videotec Halterungen User Manual

Page 5

EN - English - I

nstruc

tions manual

Insert the snap hook at the other end of the chain.
Insert the snap hook in the seat of the upper bracket.

Fig. 06

Fig. 07

The configuration in the figure is thus obtained.

Fig. 08

Fix the eye-bolt to the base using the hole in the
lower bracket, positioning the split washer and
adding Loctite 238 or equivalent.

Fig. 03

Insert one end of the chain into the hook bolt hole
and then the eye-bolt, position the notched washer
and Loctite 238 or equivalent.

Fig. 04

Fig. 05