Burr King BK75 User Manual
Page 28

Cabinet Dust Collector, Series 50 to 80
27
Step 1
A. Remove top and bottom doors and set aside.
B. Remove and discard set screws and hold-down
channels.
C. Remove and discard envelope bags.
D. Clean bottom of cabinet ledge with stiff brush.
Note: The EZ Filter Pack seals against the
bottom of the cabinet ledge.
E. Remove and empty dust drawer.
Step 1
Step 3
B
Step 2
A. Remove banded EZ Filter Pack from box. Do
not remove bands.
B. Loosen wing screws fully.
C. Move slide latches back, away from the gasket.
Step 3
A. Insert banded EZ Filter Pack over shaker bar.
B. Cut and remove bands.
C. Remove cardboard protectors.
Step 4
A. Insert one hand midway under each side of the
EZ Filter Pack.
B. Push EZ Filter Pack to bottom of the cabinets
filter frame.
Step 2
Step 4
E
D
B
C
Service Information
EZ Filter Pack Installation