Kenwood DNX7230DAB - Manual (Page 9)

9
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT
Number Name Motion
1
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.109).
• If the Security Indicator (SI) function is turned on, this indicator flashes
when the vehicle ignition is off (Instruction Manual P.80).
2
ATT • Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
3
∞, 5 (Vol) Adjusts volume.
4
AUD • Displays Graphic Equalizer screen (Instruction Manual P.95).*
• Pressing for 1 second switches camera view display on/off.
5
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
6
MENU • Displays the Top Menu screen (Instruction Manual P.19).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
7
TEL • Displays the Hands Free screen (Instruction Manual P.64).
• Pressing for 1 second displays the Voice Recognition screen. (Instruction
Manual P.72)
8
0 (Eject) • Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
9
Remote
Sensor Receives the remote control signal.
10
Disc insert
slot A slot to insert a disc media.
11
SD card slot A slot to insert an SD card. The card is used for upgrading the map. For
how to upgrade the map, refer to the instruction manual of the navigation
system.
Also, you can play audio/visual file in the card.
* The display may not switch to the Graphic Equalizer screen in some conditions.
B59-2179-00_02_13DNX_QSG_E_En.indd 9 13/01/11 10:52