Kenwood DNX7230DAB - Manual (Page 10)

10
Quick Start Guide
DNX5230DAB/DNX5230BT
1 3 4 2
5
9
6
7
8
How to insert a microSD Card
1) Slide the 4 Release key upward to detach the part
of the front panel.
2) Hold the microSD card with the label side facing
left and the notched section up, and insert it into
the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your finger from
the card.
The card pops up so that you can pull it out with your
fingers.
● Attaching the front panel:
Hold the panel securely so as not to drop it accidentally,
and fit it onto the attaching plate until it is firmly locked.
NOTE
• When detaching a part of the front panel, detach it toward
the front side as shown in the diagram right. If it is detached
upward, the front panel will be broken.
1
2
1
2
10
B59-2179-00_02_13DNX_QSG_E_En.indd 10 13/01/11 10:52