Kenwood DNX7230DAB - Manual (Page 15)

15
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT
Detaching The Front Panel
You can detach the front panel to prevent theft.
Press the < 0> button for 1 second to
open the front panel.
Then, detach the panel as the
diagrams below.
2
3
1
4
● After detaching
Put the panel in the protective bag
supplied with the unit.
NOTE
• The attaching plate closes automatically
in about 10 seconds after the front panel
is released. Remove the panel before this
happens.
• For attaching the panel, see Attaching the
front panel (P.27).
Slide the Release key upward to
detach the part of the front panel.
1
2
● Attaching the front panel
Hold the panel securely so as not to
drop it accidentally, and fit it onto the
attaching plate until it is firmly locked.
1
2
NOTE
• When detaching a part of the front panel,
detach it toward the front side as shown in
the diagram above. If it is detached upward,
the front panel will be broken.
• To prevent deterioration, do not touch the
terminals of the unit and front panel with
your fingers.
• If the terminals on the unit or front panel
get dirty, wipe them with a clean soft dry
cloth.
B59-2179-00_02_13DNX_QSG_E_En.indd 15 13/01/11 10:52