Kenwood DNX7230DAB - Manual (Page 13)

13
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT
Number Name Motion
1
Disc insert
slot A slot to insert a disc media.
2
0 (Eject) • Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
3
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.109).
• If the Security Indicator (SI) function is turned on, this indicator flashes
when the vehicle ignition is off (Instruction Manual P.80).
4
Remote
Sensor Receives the remote control signal.
5
MENU • Displays the Top Menu screen (Instruction Manual P.19).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
6
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
7
Volume Knob • Turning adjusts volume up or down.
• Pressing switches attenuation of the volume on/off.
• Pressing for 1 second displays Tone Control screen (Instruction Manual
P.96).*
8
TEL • Displays the Hands Free screen (Instruction Manual P.64).
• Pressing for 1 second displays the Voice Recognition screen. (Instruction
Manual P.72)
9
microSD
card slot A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
* The display may not switch to the Tone Control screen in some conditions.
B59-2179-00_02_13DNX_QSG_E_En.indd 13 13/01/11 10:52