Kenwood KDC-BT60U - Manual (Page 25)

English |
25
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “REJECT”.
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [VOL] knob.
Each pressing of this knob switches the calling
party.
Other Functions
Clearing the Disconnection Message
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
“HF Disconnect” disappears.
Making a Call
1
Enter Bluetooth mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
2
Select a dialing method
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Preset Call” Calling a number in the preset.
“Phonebook” Selecting the initial to be searched for the phone
book.
“In Call” Calling a number in the incoming call list.
“Out Call” Calling a number in the outgoing call list.
“Missed Call” Calling a number in the missed calls list.
“Number Dial” Making a call by entering phone number.
Operation method of each mode is described
below.
3
Exit the dialing method mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
Speed Dialing (Preset Dial)
1
Enter Bluetooth mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
2
Select the preset dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Preset call”.
3
Select the number you want to recall from the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Phone number is displayed.
4
Exit the preset dial mode
Press the [MENU] knob.
5
Make a call
Press the [VOL] knob.
⁄
• You need to register the preset dial number. Refer to
(page 27) .