Kenwood KDC-BT60U - Manual (Page 20)

20
| KDC-BT60U/ KDC-6047U
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “Tuner” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Selecting the Receiving Band
Press the [SEARCH MODE] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [ 4] or [¢] button.
✍ Details of the station selecting in operation are
set in the “Seek mode” of
(page
20) .
Traffic information
KDC-BT60U
Press the [VOL] knob for at least 1 second.
KDC-6047U
Press the [ ] / [TI] button.
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
“Traffic INFO” is displayed and traffic information is
received.
✍ If the volume is adjusted during reception
of traffic information, the adjusted volume
is memorized automatically. The memorized
volume will be applied next time the Traffic
Information function is turned ON.
Tuner Setting
You can select following Tuner Setting items.
1
Select Tuner source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Local Seek” Only stations whose reception is good are
searched in auto seek tuning.
“OFF”/ “ON”
“Seek Mode” Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
“Manual”: Normal manual tuning control.
“Auto Memory” Memorizes 6 stations with good reception
automatically.
Refer to (page 21)
“Forced MONO” Reduces the noise when stereo broadcasts are
received as monaural.
“OFF”/ “ON”
“News” Turns ON/OFF the News Bulletin Automatic
Reception function and sets the news bulletin
interrupt disabled time.
“OFF”/ “00min” – “90min”
“AF” When station reception is poor, automatically
switches to the station that is broadcasting the
same program over the same RDS network. (AF:
Alternative Frequency)
“OFF”/ “ON”
“RDS Regional” Sets whether to switch to the station only in the
specific region using the “AF” control.
“OFF”/ “ON”
“Auto TP Seek” When traffic information station reception is
poor, automatically searches for a station that
can be received better.
“OFF”/ “ON”
( : Factory setting)
5
Make a setting
Press the [
4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• News (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it starts. Set
the time during which interrupt is to be disabled after
start of another news bulletin. Changing “News 00min”
to “News 90min” turns this function ON. If news bulletin
starts when this function is ON, “News” is displayed and
news is received. If “20min” is has been set, reception of
another news bulletin will not start for 20 minutes. The
SRC
4
MENU VOL
¢ / TI
SEARCH MODE