Kenwood C-414-W - Manual (Page 10)

18
C-414 English
19
System setup
Adjusting the display brightness
(BACKLIGHT)
The brightness of the display backlight can be
adjusted and how the display backlight and
illuminations of this unit are lit can be selected.
1 Press BACKLIGHT/CONTRAST button.
2 Press MULTI CONTROL C or D button to select
"BACKLIGHT" and press ENTER button.
3 Press MULTI CONTROL C or D button to select
the backlight setting and press ENTER button
to store the setting.
Setting Function
BACKLIGHT: 1 Both the display backlight and
illuminations are turned on.
BACKLIGHT: 2 The display backlight is turned on and
the illuminations are turned off.
BACKLIGHT: 3 The display backlight is turned off and
the illuminations are turned on.
BACKLIGHT: 4 Both the display backlight and
illuminations are turned off.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Adjusting the display contrast (CONTRAST)
The contrast of the display can be adjusted.
1 Press BACKLIGHT/CONTRAST button.
2 Press MULTI CONTROL C or D button to select
"CONTRAST" and press ENTER button.
3 Press MULTI CONTROL C or D button to adjust
the contrast setting and press ENTER button to
store the setting.
Setting Function
1 & Decreases the contrast.
2 &&
3 &&&
4 &&&&
5 &&&&& Increases the contrast.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Setting Auto Power Save (A.P.S.)
A.P.S. stands for Auto Power Save, which is the
function that switches this unit OFF when it has not
been controlled for more than 30 minutes while its
power is ON and the CD and other inputs are in stop
mode.
1 Press TIMER SET button.
2 Press MULTI CONTROL C or D button to select
"A.P.S." and press ENTER button.
3 Press MULTI CONTROL C or D button to select
the A.P.S. setting and press ENTER button to
store the setting.
Setting Function
A.P.S. ON A.P.S. mode is ON.
A.P.S. OFF A.P.S. mode is OFF.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
When the A.P.S. is ON...
A.P.S. is activated when this unit is in either
condition below.
• When the input source is TUNER, AUX, D.AUDIO or iPod,
the volume level is 0 and no button has been pressed for
30 minutes.
• When the input source is CD, USB or SD, the CD player or
USB device or SD is in stop mode and no button has been
pressed for 30 minutes.
⁄
• When the A.P.S. is activated, the display shows flashing "A.P.S."
from about one minute before this unit is switched OFF.
Playback of Digital Audio Player
Kenwood digital audio player can be connected to
play audio fi les in it.
1 Connect an the player.
Connect a Kenwood digital audio player to the
[D.AUDIO] connector using an optional cable or
adapter. Also read the instruction manual for the
connected component.
Optional cable
Kenwood digital audio player
2 Press D.AUDIO/iPod button once or more to
select "D.AUDIO".
3 Turn the connected player ON and start playing it.
Basic operations
Operation type Operation
To stop playback Press STOP 7 button.
To interrupt
playback Press 6 button.
Press again to resume playback.
To search for a
particular passage
during playback Press and hold 4 or ¢ button for
more than 2 seconds.
To select a track/ file Press 4 or ¢ button in play or pause
mode.
To select a folder Press FOLDER/P.CALL A or B button
in play or pause mode.
⁄
• Some control operations may be unavailable depending on
the connected player.
Using the D.AUDIO Using the iPod/iPhone
Inserting an iPod/iPhone
1 Connect a iPod/iPhone to the iPod applied part.
2 Press D.AUDIO/iPod button once or more to
select "iPod".
The icon "iPod" appears on the display.
Playing an iPod/iPhone
Press 6 button to start playback.
Basic operations
Operation type Operation
Call to iPod/iPhone
menu display Press C button. Call to iPod/iPhone
menu display.
Press to
A or B button enter the
selected iPod/iPhone menu item and
press ENTER button..
To interrupt
playback Press 6 button.
Press again to resume playback.
To search for a
particular passage
during playback Press and hold 4 or ¢ button.
Release to resume the playback.
To select a song Press 4 or ¢ button.
To select a album * 1 Press FOLDER/P.CALL A or B button.
⁄
• * 1 The operation varies depending on the model of iPod/
iPhone.
Model other than iPod
touch/iPhone iPod touch/iPhone
The operation is available when one
of the following items is selected.
Browse item Selection
Artists, Composers All Albums
Albums, Compilations All Songs
Genres All Artists
The album is switched to the next
album found by following the
alphabetical order of track names.
– Example Track-A1 ...... Album-A
Track-B1 ...... Album-B
Track-B2 ...... Album-B
Track-C1 ...... Album-C
Repeat play
You can play the current song or the all songs
repeatedly.
Press REPEAT button.
Each press switches the selection of iPod/iPhone
play mode.
Random play
You can play all the album in random order.
Press RANDOM button.
Each press switches the selection of iPod/iPhone
play mode.
⁄
• The displayed icon may not match the actual operation with
certain iPod/iPhone models.