Kenwood DDX3023 - Manual (Page 77)

English 77
Installing the Trim Plate
1 Attach accessory 3 to the unit.
Accessory 3
Installing the Unit
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil and
attach it in place.
For more stable attachment the unit (DDX6053BT/
DDX6023BT only)
B racket
A ccessory 6
⁄
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Removing the Trim Plate
(DDX4023BT/DDX4053BT/
DDX3023/DDX3053/
DDX42BT/DDX35 only)
1 Engage the catch pins on the extraction
key 4 and remove the two locks on the
lower part. Lower the frame and pull it
forward as shown in the figure.
Accessory 4
Lock
Catch
⁄
• The frame can be removed from the top side in
the same manner.
2 When the lower part is removed, remove
the upper two locations.
Installing/Removing the Unit
EN_GET0909-001A_EQ.indb 77 EN_GET0909-001A_EQ.indb 77 12/11/13 15:28 12/11/13 15:28