Setting up bluetooth, Displaying the screen, Bluetooth setup> menu items – Kenwood DDX3023 User Manual
Page 52
52
English
3
Setting up Bluetooth
You can perform general operations such as connection and initialization through <Bluetooth
Setup> on the <Setup> menu.
Displaying the
1
On <Top Menu>:
2
Menu items
Selectable setting/item
Initial: Underlined
Paired Device
List
Press [Enter] to show the list of the registered devices. You can connect the
device or delete the registration (☞ page 51).
PIN Code
Changes the PIN code of the unit.
• Enter a new PIN code, then press [Enter].
Device Name
Shows the device name to be shown on the Bluetooth device —
“KENWOOD BT MM-7U2.”
Device Address Shows the device address of the unit.
Auto Connect
♦ ON
♦ OFF
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: Cancels.
Bluetooth HF/
Audio
Select the speakers used for Bluetooth (both phone and audio player).
♦ Front Only
♦ All
: From front speakers only.
: From all speakers.
Auto Pairing
♦ ON
♦ OFF
: Establishes the pairing automatically with the connected
iOS device (such as iPhone) even if the Bluetooth function
is deactivated on the device. (Auto pairing may not work
for some devices depending on the iOS version.)
: Cancels.
Initialize
Hold [Enter] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
EN_GET0909-001A_EQ.indb 52
EN_GET0909-001A_EQ.indb 52
12/11/13 15:27
12/11/13 15:27