Kenwood DDX3023 - Manual (Page 43)

English 43
Activating the rear view
camera
1
On <Top Menu>:
2
To deactivate, select [OFF].
Displaying the picture from
the rear view camera
The rear view screen is displayed when you
shift the gear to the reverse (R) position.
• To erase the caution message, touch the
screen.
Using a rear view camera
• To use a rear view camera, the REVERSE lead connection is required. For connecting a rear
view camera, ☞ page 76 .
To display the picture from the rear
view camera manually
DDX6023BT/DDX6053BT
(Hold)
DDX4023BT/
DDX4053BT*
1
DDX3023/
DDX3053*
2
(Hold) (Hold)
DDX42BT * 1 DDX35 * 2
(Hold) (Hold)
When displaying the picture from the rear
view camera manually, you can change the
setting of the picture. (
☞ pages 41 and 42 )
To erase the rear view screen, press and
hold the same button again.
* 1 This operation works only when <TEL Key Long
Press> is set to <R-CAM>. (
☞
page 47 )
* 2 This operation works only when <AUD Key
Long Press> is set to <R-CAM>. (
☞ page 47 )
EN_GET0909-001A_EQ.indb 43 EN_GET0909-001A_EQ.indb 43 12/11/13 15:27 12/11/13 15:27