Setting menu items – Kenwood DDX3023 User Manual
Page 44
44
English
Setting menu items
• You cannot change
(☞ page 12)
Menu item
Selectable setting/item
Initial: Underlined
A
udio
Fader/Balance
Fader : Adjust the front and rear speaker output balance.
♦ F6 to R6; Initial 0
• When using a two-speaker system, set the fader to the
center (0).
Balance : Adjust the left and right speaker output balance.
♦ L6 to R6; Initial 0
Press [
5/∞/2/3 ] or drag [ ] to adjust.
• To clear the adjustment, press [Center].
Equalizer
Change the sound mode or adjust and store the equalization
for each source. (☞ page 37)
♦ Natural/Rock/Pops/Easy/Top40/Jazz/User
Loudness
You can activate/deactivate the loudness function.
♦ ON
: Boost low and high frequencies to
produce a well-balanced sound at a low
volume level. The LOUD indicator lights up.
♦ OFF
: Cancels.
X’over
Adjust the crossover frequency. (☞ page 38)
Volume Offset
Adjust and store the auto-adjustment volume level for each
source. (For discs, the adjustment is stored for each of the
following categories: DVD/DVD-VR/VCD, CD, and DivX/
MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will
automatically increase or decrease when you change the
source.
♦ –15 to +6; Initial 0
Subwoofer
♦ ON
♦ OFF
: Activates the subwoofer.
: Cancels.
Speaker Select
Select the size of the connected speaker.
♦ Standard/Narrow/Middle/Wide
EN_GET0909-001A_EQ.indb 44
EN_GET0909-001A_EQ.indb 44
12/11/13 15:27
12/11/13 15:27