Kenwood DDX3023 - Manual (Page 70)

70 English
Symptom Remedy/Cause
iP
od/iPhone
No sound comes out of the
speakers. • Disconnect the iPod/iPhone, then connect it
again.
• Select another source and then reselect “iPod”.
The iPod/iPhone does not turn
on or does not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod/iPhone control mode is
correctly selected. (☞ page 27)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the
iPod. For details, visit .
No operations are available
when playing back a track
containing Artwork. Operate the unit after the Artwork is loaded. (☞
page 25)
Sound does not synchronize
with the video. Select <iPod> for <AV Input>. (☞ page 46)
• Videos cannot be played.
• No sound of videos comes
out.
• Connect USB Audio and Video cable KCA-iP202/
KCA-iP22F. Other cables cannot be used.
• Select <iPod> for <AV Input>. (☞ page 46)
USB
“Reading...” keeps flashing on the
screen. Turn off the power and on again.
While playing a track, sound is
sometimes interrupted. The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
EN_GET0909-001A_EQ.indb 70 EN_GET0909-001A_EQ.indb 70 12/11/13 15:27 12/11/13 15:27