Kenwood DDX3023 - Manual (Page 50)

50 English
Registering a new Bluetooth
device
When you connect a Bluetooth device to the
unit for the first time, make pairing between
the unit and the device for registration.
Pairing allows Bluetooth devices to
communicate each other.
• The pairing method differs depending on
the Bluetooth version of the device.
– For the device with Bluetooth 2.1: You
can pair the device and the unit using
SSP (Secure Simple Pairing) which only
requests confirmation.
– For the device with Bluetooth 2.0: You
need to enter a PIN code both on the
device and unit for pairing.
• Once the pairing is complete, it is
registered in the unit even if you reset the
unit. Up to 5 devices can be registered in
total.
• Only one device for Bluetooth phone and
one for Bluetooth audio can be connected
at a time.
• To use the Bluetooth function, you need to
turn on Bluetooth function of the device.
• To use the registered device, you need to
connect the device to the unit. (☞ page 51)
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
When the Bluetooth device is compatible
with Bluetooth 2.1, pairing request is sent
from the available device. Confirm the
request both on the device and the unit.
Rejects the request
Connecting Bluetooth devices
Pairing a Bluetooth device using a PIN
code (for Bluetooth2.0)
• The maximum digit of the PIN code that
can be set is 16.
1
On <Top Menu>:
2 Display the
Setup> screen.
3 Change the PIN code.
• If you skip changing the PIN code, go
to step 4 .
Deletes last entry
PIN code (initial: 0000)
EN_GET0909-001A_EQ.indb 50 EN_GET0909-001A_EQ.indb 50 12/11/13 15:27 12/11/13 15:27