Troubleshooting, Amplifi er/ speakers, Tuner – Kenwood K-521-B User Manual
Page 69
69
English
Troubleshooting
Whenever the system is not operating as expected, check the following tables to see if you can
resolve the problem yourself before requesting service.
Symptoms
Solution
Ref. page
Amplifi er/ Speakers
Symptoms
Solution
Ref. page
Tuner
No sound output
Check all connections as described in z System>. z Cancel the MUTE setting. z Unplug any headphones plugged into the main unit. z 10-13 20 [STANDBY/TIMER] indi- One of the speaker cords is short-circuited. Unplug the z power cord and then reconnect the speaker cord. z the main unit, unplug the power cord and request repairs. — No sound from the Check that the headphone plug is inserted correctly. z Increase the volume. z Cancel the MUTE setting. z 13 There is no sound from Check all connections as described in z System>. z output setting on the connected component. 13 No sound from one of Check all connections as described in z System>. z 10 56 The clock display is Set the clock as described in z 64 The timer does not Set the clock as described in z Set a start time and end time for the program timer. z 64 No radio reception Connect the antennas. z Select the broadcast band (AM or FM). z Tune the radio to the frequency of the desired station. z 10 32-35 Interference (noise) Install an outdoor antenna away from roads. z Turn off any electrical appliances that may be causing z interference. z — I have used Auto Mem- Run Auto Memory again. z Manually preset stations with frequencies that you can z receive. 34 K-521E_B60-5813-08_01_GVT0294-002A.indb 69 K-521E_B60-5813-08_01_GVT0294-002A.indb 69 09.10.26 4:32:02 PM 09.10.26 4:32:02 PM
Increase the volume.
20
13
cator is fl ashing red and
there is no sound.
There may be an internal problem. Turn off the power to
headphones
20
20
"D-IN".
Check whether "PCM" is selected for the digital audio
the speakers
Check the volume balance for the left and right speakers.
fl ashing.
work.
59
33
Move the system away from the TV.
ory and pressed the
[P.CALL] key, but I still
can't get radio recep-
tion.
35