Kenwood K-521-B - Manual (Page 42)

42 K-521
Playback from External Components
This section explains how to connect external components
to the system and play back tracks.
External Components
Connect the external component to the system as described in Other Accessories (Commercially Available Units)> (P.13).
When connecting external components, always turn this system and the external com- z
ponents off beforehand.
Also refer to the instruction manual that comes with the external component being z
connected.
1 1
3 3
Adjust the volume level.
Press the [D-IN] key when playback is performed from a de-
vice connected to the [DIGITAL IN (OPTICAL) ] terminal, while
press the [AUX] key when playback is made performed from
a device connected to the [AUX IN] terminal.
2 2
Begin playback on the connected external component.
Perform the required operation on the connected external component to start
playback.
When a digital component is se- z
lected, the input signal sampling
frequency is displayed.
The system will play PCM (32, 44.1, z
48, 88.2, 96 kHz) digital signals.
K-521E_B60-5813-08_01_GVT0294-002A.indb 42 K-521E_B60-5813-08_01_GVT0294-002A.indb 42 09.10.26 4:31:57 PM 09.10.26 4:31:57 PM