Kenwood K-525-S - Manual (Page 23)

K-525 44 45 English
Additional Information
Main
tenanc
e
Handling of D.AUDIO
Handling precautions
• Be sure to read the instruction manual provided with your
Kenwood digital audio player.
• The Kenwood digital audio player is not provided with this
system.
• The saved data may be lost depending on the operating
situations of the Kenwood digital audio player. Kenwood
will not assume any liabilities for the damage incurred due
to loss of saved data.
Usable D.AUDIO
• To control a Kenwood digital audio player from this unit
or the remote control unit, it is required to purchase the
optional Kenwood digital audio player connection cable.
Usable Kenwood digital audio player models
HDD audio
player
Memory audio
player/recorder
HD20GA7 MGR-E8/MGR-A7
M2GD55/M1GD55
M1GC7/M2GC7
As of Sep. 2010.
Handling of iPod
Handling precautions
• Be sure to read the instruction manuals provided with
your iPod/iPhone.
• The iPod/iPhone is not provided with this system.
• The saved data may be lost depending on the operating
situations of the iPod/iPhone. Kenwood will not assume
any liabilities for the damage incurred due to loss of saved
data.
Handling of CD
Handling precautions
• Hold a CD taking care not to touch the played surface.
• Do not use any disc accessory (stabilizer, protective sheet,
protection ring, etc.).
• Do not use a CD if the sticker or label on it is peeled off or
paste is projected from below a sticker or label.
• Do not stick a sheet of paper, sticker or label on a CD.
• Do not write letters on a CD using a pencil or ballpoint
pen.
Discs playable on the system
• The audio part of a CD (12 cm), CD-ROM, CD-R, CD-RW and
CD-EXTRA can be played back.
Notes on CD-ROM/CD-R/CD-RW discs
• If a CD-ROM, CD-R or CD-RW with a printable label is used,
the label surface may stick to the internal mechanism,
making it impossible to eject the disc. To prevent
malfunction of the system, do not use such a disc.
Cautions on CD discs
Always use a disc carrying the marking.
A disc without this marking may be unable to be played
back correctly.
• The disc rotates at a high speed during playback. Never
use a cracked, chipped or greatly warped disc. Otherwise,
damage or malfunction of the player may result.
• Also, do not use a disc with a non circular shape as this
may result in malfunction.
• The 8 cm CD adapter cannot be used.
CD storage
• When the main unit is not to be used for a long period,
take out the CD and store in the case.
When a CD gets dirty
• When a disc is stained with dirt or fi ngerprints, wipe the
disc in the radial direction with a soft cloth, etc.
• Do not use an analog disk cleaner, lacquer thinner, benzine
or alcohol.
Usable iPod/iPhone models
The following iPod/iPhone models can be connected to this
unit (as of Sep 2010).
Made for
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod classic
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
Handling of USB device
Handling precautions
• Be sure to read the instruction manuals provided with
each USB device.
• The USB device is not provided with this system.
• The [USB] connector on the rear of this unit is USB2.0 (Full
speed) compatible.
• It is not permitted to connect a USB device through a USB
hub.
• The data saved in the USB device may be lost depending
on the usage conditions. Kenwood will not assume any
liabilities for the damage incurred due to loss of saved data.
Usable USB devices
The following restrictions are applicable to the type and
operating method of the USB device.
• The USB device should be USB mass storage class
compatible. For whether each USB device is compatible
with the USB mass storage class, consult its dealer.
• The maximum current drain should be no more than "500
mA".
If a USB device other than specifi ed above is used, the
music fi les may be unable to be played correctly. Also,
note that even a USB device complying with the above
specifi cations may be unable to play certain music fi les
depending on the type or condition of the music fi les.
Caution for Transport or Movement
Before transporting or moving the system, prepare it as
described below.
1 Disconnect the external components including the
USB device, and also take out the disc.
2 Press [CDE] and confi rm that "NO DISC" is
displayed.
3 Wait a while, and then turn the system OFF.
4 If any other external component is connected, make
sure that it is turned OFF before disconnecting the
connection cable.
Memory Backup
Even when the power plug is unplugged from the mains
outlet, the setups of the unit are retained for about a day.
The backed up setups are as follows.
Sound and system setups
• Input source selection
• Volume setting
• Input level setting
• D-BASS and TONE settings
• TIMER SET setting
• DIMMER setting
• DISP. SAVER setting
• A.P.S. setting
• Rec Out LEVEL setting
Tuner setups
• Preset stations
• Tuning mode (Auto/manual tuning)
• Receiving frequency