Kenwood K-525-S - Manual (Page 17)

K-525 32 33 English
Enhancing the bass tone
(D-BASS)
The level of the low frequency enhancement can
be set as desired in the range from 0 (D-BASS OFF)
to 10.
1
Select D-BASS.
Press [D-BASS].
2
Adjust the enhancement level.
Press [ G]/[H].
The level can be adjusted in the increment/
decrement of 1.
D-BASS 0
D-BASS 10 Low frequencies are
enhanced.
D-BASS is OFF.
D-BASS 5
" " lights when D-BASS is set.
3
Enter the selection.
Press [ENTER].
Adjusting the tone or playing
surround audio (TONE)
The volume levels of low frequencies (BASS)
and high frequencies (TREBLE) can be set
independently in the ranges between −6 and +6.
When DTS Surround Sensation is set, the music
can be enjoyed in the 3D surround eff ect with high
feeling of presence.
1
Select TONE.
Press [SOUND].
Each press switches the tone mode alternately.
Select DTS Surround Sensation.
Adjust the low frequencies.
Adjust the high frequencies.
Cancels the setting mode.
2
Select the frequency range to
be adjusted and adjust it to the
optimum level. Alternatively, select
DTS Surround Sensation for the
surround eff ect.
■ When "BASS" or "TREBLE" is selected:
Press [ G]/[H].
The level can be adjusted in the increment/
decrement of 1.
BASS +6
BASS -6 To decrease
To increase
BASS 0
" " lights when the BASS or TREBLE tone is
set.
■ When "Surr Sens" is selected:
Press [ G]/[H].
Each press switches the DTS surround eff ect in the
following order.
DTS OFF
DTS ON : 2 Surround eff ect is enhanced
further.
Surround is OFF.
DTS ON : 1 Surround is ON.
" " lights when DTS Surround Sensation is
set.
3
Enter the selection.
Press [ENTER].
• It is not possible to adjust the tone (BASS/TREBLE), DTS
Surround Sensation ( ) and D-BASS simultaneously.
• The DTS Surround Sensation ( ) eff ect is cancelled
when headphones are connected. Disconnecting the
headphones resumes the previous eff ect.
Sound Adjustments
Cr
ea
ting the desir
ed sound setting
Resetting the adjusted sound to
the original sound (FLAT)
The results of the D-BASS and TONE adjustments
can be cancelled to fl at levels so that the original
sound is reproduced.
1
Select FLAT.
Press [FLAT].
Each press switches FLAT/UNDO alternately.
When FLAT is selected, the "D-BASS", "TONE" and
" " settings are cancelled and their indicators
extinguished.
• Pressing [FLAT] cancels the low frequency
enhancement (D-BASS), tone adjustments (TONE)
and DTS Surround Sensation eff ect (
). Pressing
it again returns the low frequency enhancement,
tone adjustments and DTS Surround Sensation to the
previous settings.