Kenwood K-525-S - Manual (Page 18)

K-525 34 35 English
System Setup
Ad
vanc
ed oper
ations
Setting the Sleep Timer (SLEEP)
When the sleep timer (10 minutes up to 90
minutes) is set before or during listening to an
input source, this unit stops playback when the set
time has expired and switches OFF automatically.
1
Set the Sleep Timer.
Press [SLEEP].
Each press switches the set time.
10
20
30
40
50
" " Not lit OFF
90
80
70
60
Display when the sleep timer is set to 30 min.
" " lights when the sleep timer is set.
■ To check the remaining period of the sleep
timer after setting...
Press [SLEEP].
The remaining sleep timer period is displayed for 5
seconds.
• When [SLEEP] is pressed now, the sleep timer can be
set from the current remaining time.
The sleep timer cannot be set when the system status is
one of the following:
• In standby mode
• During power OFF processing
• During clock/program timer setting
Adjusting the Time
(TIME ADJUST)
The day of the week and the time of the day of the
system can be set.
1
Enter the setup mode.
Press [MODE].
2
Select "TIME ADJUST".
Press [ G]/[H] to select,
then press [ENTER].
3
Set the day of the week, hour and
minute.
Adjust the day of the week, the hour,
then the minute.
Press [ G]/[H] to select,
then press [ENTER].
4
Enter the selection.
Press [ENTER].
When the setting completes, the unit exits the
setup mode automatically.
■ To display time of day when the system is OFF
(standby mode):
Press [ F].
The time of the day is displayed for 5 seconds.
• If the power cord is unplugged then plugged in or
after a power failure, adjust the time of the day again.
• The clock operation involves a certain error. It
is recommended to adjust the time of the day
periodically.