Kenwood C-717DV - Manual (Page 23)

English
23
Playing an external component
An external component can be connected to AUX IN
of this unit and played back.
1
Connect an external component.
Connect an external component to the [AUX IN]
connector on the rear of this unit.
2 Press AUX button.
3 Start playing the connected external
component.
Using the AUX
Playback of Digital Audio Player
Kenwood digital audio player can be connected to
play audio fi les in it.
1
Connect an the player.
Connect a Kenwood digital audio player to the
[D.AUDIO] connector using an optional cable or
adapter. Also read the instruction manual for the
connected component.
Optional cable
Kenwood digital audio player
2 Press D.AUDIO/iPod button once or more to
select "D.AUDIO".
3 Turn the connected player ON and start playing it.
Basic operations
Operation type Operation
To stop playback Press STOP 7 button.
To interrupt
playback Press 6 button.
Press again to resume playback.
To search for a
particular passage
during playback Press and hold 4 or ¢ button for
more than 2 seconds.
To select a track/ file Press 4 or ¢ button in play or pause
mode.
To select a folder Press FOLDER/P.CALL A or B button
in play or pause mode.
⁄
• Some control operations may be unavailable depending on
the connected player.
Using the D.AUDIO
$A'PINKUJKPFF