Kenwood RA-5000 - Manual (Page 51)

English
51
Sound ad
ju
st
men
t
Dimension (RV-7000/RV-6000 only) Dimension (RV-7000/RV-6000 only)
¶ Pro Logic IIx Music and Pro Logic II Music mode only
The center of the acoustic field can be moved toward the front
or rear.
1
Press [SOUND] repeatedly to select "DIMENSION".
2
Use [MULTI CONTROL
∞/5] to move the acoustic
field to the front or rear.
Dimension indicator
Sound center moved
toward the rear Sound center moved
toward the front
Center width (RV-7000/RV-6000 only) Center width (RV-7000/RV-6000 only)
¶ Pro Logic IIx Music and Pro Logic II Music mode only
The center channel audio can be distributed to the front left and
right speakers to enhance the width of the sound in front of the
listener.
1
Press [SOUND] repeatedly to select "CENTER
WIDTH".
2
Use [MULTI CONTROL ∞/5] to move the acoustic
field to the left or right.
Center width indicator
When the indicator extends to the left and right wider, more part of the
center channel audio is distributed to the front left and right speakers.
• This setup is not available when the center speaker setup
is "OFF".
Center image (RV-7000/RV-6000 only) Center image (RV-7000/RV-6000 only)
¶ DTS Neo:6 Music mode only
The output level of the center speaker can be adjusted.
1
Press [SOUND] repeatedly to select "CENTER
IMAGE".
2
Use [MULTI CONTROL ∞/5] to adjust the center
speaker output.
More part of the center channel audio is distributed to the front left and
right speakers as the number increases.
• This setup is not available when the center speaker setup
is "OFF".
B60-5827-08_00_En.indd 51 10.8.3 11:08:38 AM