Kenwood RA-5000 - Manual (Page 48)

48
RV-7000/RV-6000/RA-5000
Sound ad
ju
st
men
t
08/7,&21752/
721(
%$66%2267
$&7,9((4
721(5$ 08/7,&21752/ ∞/5
ACTIVE EQ mode ACTIVE EQ mode
The optimum acoustic field effect can be selected according to
the purpose of playback.
1
Press [ACTIVE EQ].
Each press switches the mode as follows:
Display Setting
"A-EQ MUSIC" Effective when listening to music.
"A-EQ CINEMA" Effective when watching a movie.
"A-EQ GAME" Effective when playing a game.
"A-EQ OFF" Active EQ function is off.
Bass Boost Bass Boost
The Bass Boost can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Adjusting the Tone Adjusting the Tone
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [TONE].
2
Select whether or not the tone level is to be
adjusted.
Use [MULTI CONTROL ∞/5] to select "TONE ON" or "TONE
OFF".
[TONE]
Display Setting
"TONE ON" The tone level can be adjusted. Go to step 3 after setting.
"TONE OFF" The tone level is not adjusted.
3
Adjust the level of "BASS" (low frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
4
Adjust the level of "TREB" (high frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
Adjusting the sound
B60-5827-08_00_En.indd 48 10.8.3 11:08:31 AM