Siemens KG49NSW31 - Manual (Page 32)

en
32
Switching
the appliance on
Switch on the appliance with the On/Off
button !/12.
A warning signal sounds. “AL” flashes on
the temperature display 3.
Press the alarm button "/9.
The warning signal switches off. The
warmest temperature is displayed briefly.
The factory has recommended
the following temperatures:
■
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
Operating tips
■
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■
The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
7 Setting buttons
You can use the “+” and “–”
button to set the temperature of
the refrigerator and freezer
compartment. In addition, special
functions can be switched on
and off.
8 “light” button
If the button is pressed,
the background
light on the display
can be switched on at a greater
luminosity for approx.
10 seconds.
9 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
10 “timer” button 0
This function can be used to cool
drinks quickly and reliably in
the freezer compartment.
When the button has been
pressed, a warning signal
automatically sounds after 20
minutes. The drinks are cooled
ready. Display 3 indicates
the remaining time. When
the “alarm” button is pressed,
the warning signal is switches off.
To reduce the preset time of 20
minutes, press the “timer” button
and set the required time with
the selection button 7.
To terminate fast cooling, press
the “timer” button twice within 3
seconds.