Siemens KI39FP60 - Manual (Page 30)

en
30
Controls
Fig. 2
Switching
on the appliance
Switch on the appliance with the On/Off
button, Fig. 1/9. The temperature
warning signal is switched off by
pressing the alarm button, Fig. 2/1.
The temperature displays flash and the
alarm button is lit until the appliance has
reached the set temperatures.
The light in the refrigerator compartment
is lit when the door is open.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ “Cool-fresh” compartment:
at almost 0 °C
■ Freezer compartment: -18 °C
Operating tips
■ After the appliance has been switched
on, it may take several hours until
the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
■ The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■ The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
1 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
2 “Super” button (freezer
compartment)
Switches super freezing
on and off.
3 Temperature selection button
freezer compartment
The button sets the temperature
in the freezer compartment.
4 Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
5 “Super” button refrigerator
compartment
Switches super cooling on and
off.
6 Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.
7 Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
8 ON/OFF display
The ON/OFF display is lit when
the appliance is in operation.