Controls, Notes, Residual heat indicator – Siemens ET475MY11E User Manual

Page 14: Before using for the first time, Cleaning, Heating the teppan yaki, Setting the teppan yaki, Switching the teppan yaki on and off, Note, Setting the temperature

Controls
When you touch a symbol, the respective function is activated.

Notes

■

The settings will remain unchanged if you touch several

symbols at once. This allows you to wipe up spills on the

control panel.

■

Always keep the controls dry. Moisture reduces their

effectiveness.

Residual heat indicator

The Teppan Yaki has a two-stage residual heat indicator.
If an

•

appears in the display, the Teppan Yaki is still hot. When

the Teppan Yaki cools down further, the display switches to

The indicator goes out when the Teppan Yaki has cooled down

sufficiently.

Before using for the first time

In this section, you can find out what you must do before using

your Teppan Yaki to prepare food for the first time. Read the

Safety information section beforehand.

Cleaning

Clean the Teppan Yaki thoroughly with lukewarm soapy water

before first use.

Heating the Teppan Yaki

To get rid of the new cooker smell, heat up the empty Teppan

Yaki. 30 minutes at 240 °C is ideal.

Setting the Teppan Yaki

In this section, you can find out how to set the Teppan Yaki.The

table shows temperatures and cooking times for various meals.

Switching the Teppan Yaki on and off

Use the main switch to switch the Teppan Yaki on and off.
Switching on: Touch the

symbol. An audible signal sounds.

The indicator above the main switch lights up. The Teppan Yaki

is ready for use.
Switching off: Touch the

symbol until the indicator above the

main switch goes out. The Teppan Yaki is switched off.The

residual heat indicator remains on until the Teppan Yaki has

cooled down sufficiently.

Note: The Teppan Yaki switches off automatically if the grill

setting is set to 0 for more than 20 seconds.

Setting the temperature

Switch the Teppan Yaki on using the main switch.

‹

. and the

symbol light up in the temperature display.

Slide your finger along the settings range until the desired

temperature appears on the display.

Once the set temperature is reached, a signal sounds and the

heating indicator goes out. Now you can place the food on the

Teppan Yaki.

Note: The Teppan Yaki regulates the heat level by switching on

and off. Even at maximum power, the heating can switch on

and off.

Keep warm setting

The Teppan Yaki must be switched on.
Select the keep warm setting

in the settings range.

Do not try to keep too much food warm at once. All food to be

kept warm should be in contact with the grilling surface, as

otherwise it will cool down. Do not keep food warm for too long

as it will dry out.

Cleaning level

In cleaning level

, the appliances heats up to 40 °C. You

can leave dirt to soak by adding some water and washing-up

liquid to the grilling surface (max. 1 hour). After dissolving the

dirt, you can begin cleaning.

Switching off the rear heating zone

When preparing small quantities, you can choose to use only

the front zone. You can use the rear zone to keep the food

warm.
The Teppan Yaki must be switched on.
Touch the

symbol. The indicator above the symbol lights up.

The rear heating zone is now switched off.
When you switch the appliance on again, this setting is

retained. You can change this behaviour in the basic settings.