Siemens KI41FAD30 - Manual (Page 26)

en
26
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of
+4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■
After the appliance has been switched
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
■
The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from
+3 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Cool-fresh compartment
The temperature in the “cool-fresh”
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased.
(See chapter “Eliminating minor faults
yourself”.)
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 5 to switch off
the warning signal.