Siemens ET475MY11E - Manual (Page 40)

40
Rectifying faults
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Indicator Fault Action
Blank There is no power supply. Check the household fuse for the appliance. Check
whether there is a power cut by trying other
electrical appliances
E is flashing The control panel is Dry the control panel or remove the object. Then
damp or an object is touch any control panel.
resting on it.
Er + number Appliance fault Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
F0 Appliance fault Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
F4 The electronics have Wait until the electronics have cooled down
overheated and have sufficiently. Then touch any control panel.
switched off the
appliance.
F6 / F7 Appliance fault Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
F8 The appliance was in use You can switch the appliance back on again
for too long and has
immediately.
switched itself off.