Siemens ET475MY11E - Manual (Page 39)

39
Suitable cleaning agents Use soapy water to remove greasy residues. Some
food can leave white marks on the frying surface
after cleaning the appliance. You can remove these
marks using lemon juice or vinegar. Carefully wipe
clean with a moist cloth.
Burnt in residues We recommend our grill cleaner (order number
463582) to remove burnt in residues on the frying
surface. Apply the cleaner on the residues when the
appliance is cold. Leave for at least 2 hours, if
necessary overnight. Then carefully wipe clean with a
moist cloth and dry. For further reference read the
instructions on the packaging.
Stainless-steel cleaner If the frying surface or the metal frame turn matte
after some time, you can clean them with a
stainless-steel cleaner. You can order a suitable
stainless-steel cleaner from your specialist dealer or
in our webshop (order number 464524).
Cleaning the frame Wipe clean the metal frame using warm soapy water.
Do not hit the metal frame with the spatula.
Glass ceramic panel and Remove light soiling using a damp cloth, or with
glass ceramic cover warm soapy water.
Rinse any left-over detergent with cold water and dry
the surface well.
Do not clean the glass ceramic cover in a dish
washer.
Unsuitable cleaning agents Do not use any chemically aggressive cleaners such
as oven sprays or stain removers.
Do not use metal pot cleaners, steel wool, wire
brush or similar.
The frying surface will show signs of use after some
time from the spatulas, and also from abrasive
cleaners or abrasive sponges. This does not interfere
with the use of the appliance.