Siemens ET475MY11E - Manual (Page 37)

37
Changing the basic
settings
The teppan yaki must be switched off.
1. Switch on the teppan yaki.
2. Within the next 10 seconds, touch the
W
symbol
for 4 seconds. c2 appears on the left-hand
display and 2 on the right-hand display.
3. Touch the
W
symbol repeatedly until the desired
symbol appears on the left-hand display
4.
Set the desired value on the control panel.
5. Touch the
W
symbol for 4 seconds.
The setting is stored.
Switching off without storing To exit the basic setting, switch off the teppan yaki
the settings
with the main switch. The changes of the settings
will not be saved.