Water filter – Siemens TE506209RW User Manual
Page 12
8
de
en
12� Place a receptacle under outlet (6a)�
13� Press the
start button (10)�
The language you selected is saved�
The appliance heats up and rinses� Some
water will run out of the coffee outlet�
When the drink selection menu is shown in
the display, the appliance is ready for use�
Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for
optimal performance� The appliance
switches off automatically after a specific
time (time span can be programmed, see
“Menu settings”
Shut off
)�
Exception: The appliance switches off
without rinsing if only hot water or steam
were dispensed�
To switch the appliance off manually before
this, press the
e
off /
j
button (13)�
The appliance rinses and switches off�
N.B.: If the appliance is being used for the
first time, a service program has been run,
or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed�
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed�
After extended use, water droplets may
form on the ventilation slots� This is normal�
Water filter
A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed� To do this, proceed as follows:
1� Press the water filter firmly into the
water tank with the aid of the measuring
spoon (19)�
2� Fill the water tank (17) with water up to
the
max mark�
3� Press and hold the
e
off /
j
button (13)
for at least three seconds� The menu
opens�
4� Press the
e
off /
j
button (13)
repeatedly until the display shows
No / Old filter
�
5� Select
Activate filter
with the upper
rotary knob (15)�
6� Press the
start button (10)�
7� Place a receptacle with a capacity of
0�5 litres under the outlet (6a)�
8� Press the
start button (10)�
9� Water will now flow through the filter to
rinse it�
10� Empty the container�
The appliance is ready to use once more�
Note: Rinsing the filter simultaneously
activates the setting for the
Change filter!
display�