Kenwood TH-K20A User Manual
Page 15
7
Keypad
Use the keypad to perform the following operations. Additionally, you can use
the 10-key keypad for direct frequency entry and manually transmitting DTMF
tones.
Key name
Press
Operation
Ref. page
[F]
A
[KEY]
To enter MHz tuning mode.
To turn the Function ON.
11
[F] - [KEY] To turn the Function OFF.
–
[KEY] (1s)
To turn the Lock function ON and OFF.
14
[VFO]
B
[KEY]
To enter VFO mode.
11
[F] - [KEY]
To copy the current Memory channel or Call
channel to the VFO (memory shift).
24
[KEY] (1s)
To start Band scan.
26
[MR]
C
[KEY]
To enter Memory Channel mode.
18
[F] - [KEY]
To store the current operating frequency in the
Memory channel.
19
[KEY] (1s)
To start Memory scan
28
[CALL]
D
[KEY]
To select the Call channel.
23
[F] - [KEY]
To store the current operating frequency to the
Call channel.
[KEY] (1s)
To start CALL scan.
28
[MENU]
1
[KEY]
To enter Menu mode.
15
[TONE]
2
[KEY]
To select the Signaling (Tone, CTCSS, DCS or
Cross tone) function.
32, 36,
37, 39
[LOW]
3
[KEY]
To select an Output power.
12
[SQL]
4
[KEY]
To enter Squelch Level Adjustment mode.
10
[T.SEL]
5
[KEY]
To enter the Tone frequency, CTCSS
frequency or DCS code setup mode.
32, 36,
37, 39
[KEY] (1s)
To start Tone frequency, CTCSS frequency or
DCS code scan.
[ ]
6
[KEY]
To enter the Tone Alert function setup mode.
44
[SHIFT]
7
[KEY]
To select an Offset direction.
31
[REV]
8
[KEY]
To turn the Reverse function ON or OFF.
34
[PF]
9
[KEY]
To activate the Program function.
52