Kenwood DDX771 - Manual (Page 48)

48
SETTINGS
setting screen
* 1
Select the text language used for on-screen
information.
• English (initial )/Spanish/French/German/Italian/
Dutch/Russian /Portuguese/Chinese-Simplified/
Chinese-Traditional/Thai/Turkish/Arabic/
Persian/Hebrew/Greek/Indonesia/Korean
– For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/
Portuguese are available. If another language
has been selected, the text language for external
monitors will be set to English.
• GUI L anguage: Select a language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
< Clock>
Adjust the clock time. (Page 5)
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
• ON (Initial): Activates the remote sensor.
• OFF: Cancels.
< SETUP Mem ory>
You can memorize, recall, or clear the settings you
have made. (Page 44)
*
2
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of the registered devices. You can connect the
device or delete the registration. (Page 34)
• PIN C ode: Changes the PIN code of the unit.
(Page 33)
• Device Name: Shows the device name to be
shown on the Bluetooth device— KENWOOD BT
MM-8U2.
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/A udio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only (Initial): From front speakers only.
– All : From all speakers.
• Auto Pairing:
– ON (initial): Establishes the pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
* 3
Configures settings for using a Bluetooth device,
connected via ADS adapter. Press [Enter] to display
the screen.
*
3
Shows the information/changes the settings for
using the ADS adapter.
*
4
Assigns the function of the TEL button when held.
• V-OFF: Turns off the screen. (Page 8)
• VOICE (initial): Activates voice dialing. (Page 37)
• R-CAM: Displays the picture from the rear view
camera. (Page 31)
* 5
Assigns the function of the AUD button when held.
• V-OFF (initial for DDX271/DDX2071): Turns off the
screen. (Page 8)
• R-CAM (initial for DDX771): Displays the picture
from the rear view camera. (Page 31)
* 6
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
Activate or deactivate the security function.
(Page 4)
*
7
Displays the serial number.
Adjust the touch position of the buttons on the
screen. (Page 45)
Displays the version information of the software.
You can update the software. (Page 45)
* 1 “Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
* 2 Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/
DDX3071BT .
* 3 Only for DDX271.
* 4 Only for DDX491HD/DDX471HD/DDX371/DDX310BT/DDX3071BT.
* 5 Only for D DX771/DDX271/DDX2071 .
* 6 Only for DDX3071BT/DDX2071.
* 7 Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/
DDX271.
DDX_Entry_K.indb 48 2013/11/01 16:10