Kenwood DDX771 - Manual (Page 31)

ENGLISH 31
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page 56 )
Preparation:
If you want to use “AV-IN2”, select [AV-IN2] for
Input> setting. (Page 47)
• No preparation is required for “AV-IN1”.
Indications and buttons on the source
control screen
AV-IN name
Operation buttons
[MODE]
Changes the AV-IN name.
• Press [ ] or [ ] to select an AV-IN
name.
• This setting does not affect the
source name “AV-IN 1”/ “AV-IN 2”
displayed on .
[MENU] Displays the screen.
Starting playback
1 Connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals.
2 Select “AV-IN1” or “AV-IN2”as the source.
(Page 9)
3 Turn on the connected component and
start playing the source.
Using a rear view camera
• To use a rear view camera, a REVERSE lead
connection is required. (Page 55 )
Activating the rear view camera
1 Display the setting screen.
On the screen:
2
To deactivate: Select [Off] for .
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
DDX491HD/DDX471HD/DDX371/
DDX310BT/DDX3071BT* 2
DDX771* 1
(Hold)
(Hold) (Hold)
DDX271/
DDX2071* 1
• When displaying the picture from the rear view
camera manually, you can change the setting
of the picture using [Zoom]/[Aspect]/[Adjust].
(Page 41)
To exit the rear view screen: Press and hold the
same button again.
* 1 This operation works only when is
set to [R-CAM]. (Page 48)
* 2 This operation works only when is
set to [R-CAM]. (Page 48)
DDX_Entry_K.indb 31 2013/11/01 16:10