Kenwood DDX771 - Manual (Page 21)

ENGLISH 21
TUNER
(Only for DDX771/DDX371/DDX310BT/DDX3071BT/DDX271/DDX2071)
Listening to the radio
Indications and buttons on the source
control screen
1 2 3
4 5 6 7
Tuner reception information
1
Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
6 TI indicator
7 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
Operation b uttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[MODE] Stores the stations with strongest
signals automatically on the
Mode> screen. (See the right
column.)
[TI] Activates/deactivates TI standby
reception mode. (Page 22)
[MONO]* Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[TEXT] Changes the display information.
(See the right column.)
[PTY]* Enters PTY search mode. (Page 22)
[AM] Selects the AM band.
[FM] Selects the FM band.
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[ ] [ ] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[MENU] Displays the screen.
* Appears only when FM is selected as the source.
Changing the display information
The preset list containing the station names for FM
RBDS (when PS signal is coming in) is displayed.
• Pressing [TEXT] again to display the text
information for the station currently being
received.
Presetting stations
Storing stations in the memory
You can preset 6 stations for each band.
Automatic p resetting — AME (A uto Mem ory)
1
2
(Hold)
Local stations with the strongest signals are found
and stored automatically.
DDX_Entry_K.indb 21 2013/11/01 16:10