Kenwood DNX691HD - Manual (Page 16)

16 ñ
English
6) Enter PIN code form the cell-phone.
Registering is completed.
The PIN code is set to “0000” as default.
2
Connect your cell-phone to the unit.
1) Touch the device name you want to connect
in the Bluetooth SETUP screen.
2) Touch [ON] of [TEL(HFP)] in the BT
Connection Settings screen.
The selected device is connected to the unit.
When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
3
Make or receive a phone call.
See the table below for each operation method.
Call by entering a phone number
1) Enter a phone number with number keys.
2) Touch [
].
Call using call records
1) Touch [ ] (incoming calls), [ ] (missed
calls), or [ ] (outgoing calls).
2) Select the phone number from the list.
3) Touch [
].
Call using the phonebook
1) Touch [ ].
2) Select the name from the list.
3) Select the number from the list.
4) Touch [
].
Call using the preset number
1) Touch [Preset #] to start calling the
corresponding phone number.
2) Touch [ ].
Call by voice
You can make a voice call using the voice
recognition function of the cell-phone.
1) Touch [
].
2) Pronounce the name registered in the cell-
phone.
✎ NOTE
• For detailed operation, see Using Hands-Free Unit
(P.85) in the Instruction Manual.
LVT2547-001C_14DNX_QSG_K_En.indd 16 14/02/04 15:21