Kenwood KDC-X8019BT - Manual (Page 35)

English | 35
Audio Adjustments
“Sound Elevation” Virtually raises the sound field using
the DSP.
“OFF”/ “Low”/ “Middle”/ “High”
“Volume offset” Sets each source’s volume as a difference
from the basic volume.
“–8” — “0” (AUX: “–8”— “+8”)
“Rear Mute” * 2 Sets the Rear channel Mute.
“ON”/ “OFF”
“SubWoofer Mute”/
“Woofer Mute”* 1
Sets the Subwoofer Mute.
“ON”/ “OFF”
“Preset”* 1 Sets the audio preset.
- Audio Preset Memory (page 42).
- Audio Preset Recall (page 43).
“Bass Boost”* 1 Sets the Bass Boost level in 3 steps.
“OFF”/ “Level1”/ “Level2”/ “Level3”
“Loudness”* 1 Makes the sounds at high and low
frequencies louder.
“OFF”/ “Low”/ “High”
“Balance”/ “Fader” * 2 Adjusts left/right and front/rear speaker
balance.
(Left) “L15” — “0” — “R15” (Right)
(Rear) “R15” — “0” — “F15” (Front)* 1
( : Factory setting)
* 1 This setting can be made when “2 Zone” (Dual Zone
System) is set to ON.
* 2 This setting cannot be made when the speaker system is
connected in the 3-way mode.
1 Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Remarks
• DSP Set
When “DSP Set” is set to “Bypass”, the DSP function is
disabled , and the colored items can not be set.
Audio Control
You can adjust following Audio Setting items.
Display Overview
“SubWoofer Level”/
“Woofer Level”* 1
You can set subwoofer level.
“–15” — “0” — “+15”
“Preset Equalizer”* 1 Sets the sound quality.
- Preset Equalizer curve Select (page
36).
“Manual Equalizer”* 1 Sets the sound quality.
- Manual Equalizer Control (page 36).
“Pro Setup”
“DSP Set”* 1 * 2 “Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
“Car Type”* 1 To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
- Car Type Selection (page 38).
- Speaker Setting (page 38).
- X’Over Setting (page 39).
- Listening Position Selection (page
40).
- Listening Position Fine Adjustments
(page 40).
- Channel Level Fine Adjustments (page
41).
“Speaker Setting”* 1
“X’Over”* 1
“DTA Setting”* 1
“Zone Control” * 2 Sets the Dual Zone System.
- Dual Zone System (page 37).
“Sound
Enhancements”* 1
“Supreme” Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/
SD/CD and iPod source.
“ON”/ “OFF”
“HIGWAY-SOUND” Compensates the low volume or bass
sound being lost by road noises to make
vocal sound clearer.
“OFF”/ “Low”/ “Middle”/ “High”
“Space Enhancer” Virtually enhances the sound space using
the DSP.
“OFF”/ “Small”/ “Medium”/ “Large”
“Sound Realizer” Virtually makes the sound more realistic
using the DSP.
“OFF”/ “Level1”/ “Level2”/ “Level3”
SRC
4
VOL
¢ 38
MENU VOL
Next page 3
B64-4900-00_00_en.indd 35 11/12/28 12:04