Before use – Kenwood KDC-X8019BT User Manual
Page 3
English
|
3
Before use
2
WARNING
To prevent injury or fire, take the following
precautions:
To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Do not use this unit before canceling
Demonstration mode!
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode. Refer to Setting> (page 34). How to reset your unit If this unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Connector Cleaning the connector The unit may not function properly if the connectors between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ¤ • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to GB2312 or ISO 8859-1 can be displayed. Refer to “Menu” > “Chinese” of • Characters that conform to ISO 8859-1 (“English”), Windows CP 1256 (“Arabic”/ “Persian”) and Windows CP 874 (“Thai”) can be displayed. Refer to “Menu” > “TAG Language” of • In this document, the description indicator will light means a status is displayed. Refer to Operation> (page 27) for the details of the status display. • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Handling CDs • Do not touch the recording surface of the CD. tape stuck on it. • Do not use disc type accessories. outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.) • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. B64-4900-00_00_en.indd 3 11/12/28 12:04
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
• Do not stick tape etc. on the CD, or use a CD with
• Clean from the center of the disc and move