Notifier Lumidor Minimax XT - Manual (Page 3)

General Specification
Standard Specification
General Disposable single gas monitor for the protection of personnel against toxic and Oxygen gas hazards
Maximum Operating Life 2 years after activation
Shelf Life 12 months before activation (CO and H
2
S), 6 months before activation (O
2
)
Sensor Range Carbon Monoxide CO 0 to 1000 ppm (display: 0-200 ppm)
Hydrogen Sulphide H
2
S 0 to 100 ppm (display: 0-100 ppm)
Oxygen O
2
0 to 30%v/v (display: 0-25.0%v/v)
Alarm Set Points CO 35 ppm 100 ppm
(Note: Other alarm settings H
2
S 10 ppm 15 ppm
are available upon request)
O
2
23.5% 19.5%
Calibration CO/H
2
S Zero adjustment (optional Span)
O
2
Span adjustment
Operating Temperature -4°F to +122°F (-20°C to +50°C)
Humidity 5-95% RH (non-condensing)
Audible Alarm 95db at 4in (10cm)
Visual Alarm High intensity red LEDs
Vibrating Alarm Supplied as standard
Display Custom LCD
Sensor Type Electrochemical
Battery 3.6V non-replaceable Lithium battery
IP Rating IP67 (NEMA 4 & 6)
Intrinsic Safety Europe: II 2G EEx ia IIC T4 (ATEX)
UL/cUL: Class 1, Div 1, Groups A, B, C, D T4
RFI/EMC CE EN50270:1999 and EN55011
Dimensions 3.4"(H) x 2"(W) x 1.1"(D)
(87mm x 50mm x 27mm)
Weight CO/H
2
S 73g (2.57oz)
O
2
82.3g (2.90oz)
*Reflex TM not available for all sensors
Display Details
Test pass icon
Level 2, CO, H
2
S
Level 1, CO, H
2
S, O
2
Level 2, O
2
Life time: Months, days, hours
Concentration units
Low peak
High peak
Test Fail icon
Life time, alarm reading
Battery
1 l
ev
e
L
2 l
ev
e
L
* Oxygen detection products must only be used
to detect oxygen depletion in air.