Notifier APS-6R - Manual (Page 2)

Page 2 of 2 — DN-5952:A1 • 08/20/09
NOTIFIER® is a registered trademark of Honeywell International Inc.
©2009 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Made in the U.S. A.
CAB-400AA: For AFP-300 and AFP-400 control panels.
Mounts up to one APS-6R. An option module, without expan-
sion card, is allowed.
AFP-200 backbox. Mount up to one APS-6R in the lower
position of the box (where batteries mount). A BB-17 battery
box is required.
PRODUCT LINE INFORMATION
APS-6R: 24-volt, filtered power supply (120/220 VAC input).
EOLR-1: 12/24 VDC end-of-line relay.
CHS-4: Four-module chassis.
CHS-4L: Four-module chassis (low-profile).
Agency Listings and Approvals
The listings and approvals below apply to the basic APS-6R. In
some cases, certain modules may not be listed by certain
approval agencies, or listing may be in process. Consult fac-
tory for latest listing status.
• UL: S624
• ULC: CS118/CS733/CBP696 Vol. IX
• FM: Approved (AFP-200, AFP-300/400, AFC-600, NFS-
640, AFP-1010/AM2020, NFS-3030, System 500, Sys-
tem 5000)
• CSFM: 7315-0028:190, 7165-0028:214 (NFS-640);
7165:0028:224 (NFS-3030, NFS2-3030); 7170-0028:216
(NFS-640); 7170-0028:223 (NFS-3030, NFS2-3030)
• MEA: 195-97-E Vol. II, 447-99-E (AFC-600), 317-01-E
(NFS-640), 345-02-E (NFS-3030), 232-02-E (NFS2-
3030)
APS-6R
Assembly
Mounting APS-6R to the
CHS-4 Chassis
59
52as
sy
.wm
f
5
952m
t1.wmf
APS-6R
Assembly