Notifier UZC-256 - Manual (Page 2)

Page 2 of 2 — dn-3404:b • 11/17/09
NOTI•FIRE•NET™ is a trademark of Honeywell International Inc, IBM® is a
registered trademark of IBM Corporation.
©2006 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Made in the U.S. A.
UZC-256 Programming
Programming the UZC-256 is accomplished through the serial port of an IBM®-compatible PC. The Software Interface (UZC-SI)
enables the user to select from a variety of code options (see software coding). The UZC requires power from the control panel to
download the programmed code. Alternately, it may be powered “remotely” with a 9 VDC power transformer which is included
with the UZC Hardware Interface (UZC-HI).
UZC Software Coding
Each code (up to 256) may be up to four digits long and each
digit can be from 0 to 15 pulses. User-selectable times and
delays may also be programmed.
Delay Time: The period from when the alarm is received at
the control panel and the code begins. Value can be 0 to 99
seconds.
Number of Rounds: The number of times the code will
sound. Value can be 1 to 99.
Pulse Time: The period each pulse will sound. Value can be
0 to 1 second in 1/100th of a second increments.
Digit Pause: The pause between digits of the code. Value
can be 0 to 10 seconds in 1/10th of a second increments.
Pulse Pause: The pause between pulses of the digit. Value
can be 0 to 1 second in 1/100th of a second increments.
Round Pause: The pause between the round(s) of the code.
Value can be 0 to 10 seconds in 1/10th of a second incre-
ments.
General Alarm: Provides the UZC with the capability to turn
on selected Indicating Circuits (general alarm) after complet-
ing its code. See the appropriate installation manual for infor-
mation on the “General Alarm” feature.
Product Line Information
UZC-256: Universal Zone Coder, power cable and mounting
hardware.
UZC-SI: UZC-256 Software Interface Version 2.0 (must be
used with UZC-256 EPROM 73712 or greater). Provides the
capability to program the UZC. Includes programming instruc-
tions and programming software.
UZC-HI: UZC-256 Hardware Interface. Includes null modem
cable, 9-pin to 25-pin adapter, and a 9 VDC power transformer.
BB-UZC: Backbox for housing the UZC for applications where
the UZC will not fit in the panel enclosure. Black casing.
BB-UZC-R: same as BB-UZC, but with a red casing.
75100: Power Harness. Order when mounting the UZC-256 in
the BB-17 (System 500 applications).
IBM® Compatible PC UZC-256
3404p
c.wm
f
07
04uz
c.wmf