Notifier LCD-80 - Manual (Page 2)

Page 2 of 2 — DN-3198:A1 • 04/05/2010
Notifier® is a registered trademark of Honeywell International Inc.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Made in the U.S. A.
ABF-1B: Annunciator Flush Box, 9.938" (25.24 cm) high, 4.625"
(11.75 cm) wide, and 2.5" (6.35 cm) deep. Order AKS-1B key
switch if desired. Can also be mounted in ABF-2B or ABF-4B
annunciator backboxes.
ABS-1TB: Deep Surface Backbox (mounts one LCD-80).
AKS-1B: Key Switch (black) to enable/disable controls when
mounted in ABF or ABS-1TB.
PRN-6: 80-Column Serial Printer (see PRN data sheet).
Agency Listings and Approvals
These listings and approvals apply to the modules specified in
this document. In some cases, certain modules or applications
may not be listed by certain approval agencies, or listing may be
in process. Consult factory for latest listing status.
• UL Listed: S635
• ULC Listed: S635
• MEA: 345-02-E; 317-01-E (NFS-640); 128-07-E
• FDNY: COA#6026, 6038
• CSFM: 7120-0028:156
• FM Approved
The LCD-80 in ACS Mode
NFS-320, NFS2-640, NFS2-3030, or NCA-2 connecting to LCD-80
The LCD-80 in Terminal Mode
NFS-320, NFS2-640, NFS2-3030, or NCA-2connecting to LCD-80