Notifier BRG Series - Manual (Page 2)

Page 2 of 2 — DN-65 • 02/26/97
The BNG-1SP BG-2 Backbox
The DABC-SP
it will be visually detectable at a minimum distance of one
hundred feet, front or side. Manual stations shall be con-
structed of die-formed aluminum, with operating directions
provided on the front cover in raised letters. Stations shall
be suitable for surface mounting on a standard single-gang
box or switch plate, and shall be installed 48" above the
finished floor per ADA requirements. Manual stations shall
be Underwriters Laboratories listed.
The DABC Double-Action Cover and DABC-SP adapter pro-
vide a simple and economical means to convert NOTIFIER
single-action BNG-1 Manual Fire Alarm Stations into
double-action units.
The purpose of these adapters is to deter false alarms
caused by passersby who pull a station and continue on
without stopping. Using the double-action adapter requires
a person to stop and perform two distinct actions: lifting
the cover and pulling the breakstation. Such action is suf-
ficient to deter potential pranksters from initiating costly
alarms.
The DABC -SP consists of a red and white BSA approved
back plate and the cover assembly which fits over the BNG-
1. The cover is hinged to a bracket with nylon bushings
which form the cover housing. The DABC-SP back plate
and cover housing are punched and drilled to accommo-
date field wiring and the mounting screws that secure the
BNG-1 and adapter to a wall backbox.
PHYSICAL DIMENSIONS
Length: 7.000 inches (17.64 cm)
Width: 3.500 inches (8.82 cm)
Depth: 1.250 inches (3.15 cm)
DABC-SP BACK PLATE
Length: 9.650 inches (24.318 cm)
Width: 6.750 inches (17.01 cm)
PRODUCT LINE INFORMATION
Model No. Description
BNG-1* Aluminum pull station with red lettering.
BNG-1TSL Standard "LOCAL" style BNG-1 (aluminum)
unit with terminal strip.
BNG-1TSRL Standard "LOCAL" style BNG-1R (red) unit
with terminal strip.
BNG-1SP* Spanish aluminum pull station with red
FUEGO (FIRE) and JALE (PULL) letters.
UL listed (contact factory for current status
of other listings and approvals).
BNG-1R** Red aluminum pull station with silver let-
tering.
BNG-1RC*** Red aluminum pull station with silver En-
glish/French lettering — ULC listed.
BNG-1F** Aluminum pull station with red lettering and
DPDT switch.
BNG-1TS* Aluminum pull station with red lettering and
two-position, double-row terminal block.
BNG-1FTS* Aluminum pull station with red lettering with
DPDT switch and two-position, double-row
terminal block.
BRG-1** Aluminum pull station with red lettering and
break-glass option.
BRG-1R** Same as BRG-1, but painted red.
BG-2 Surface-mounting backbox for BNG/BRG
Series stations. One end tapped for 1/2"
conduit.
146-0601 Replacement glass retainer for BRG.
DABC Second action cover for BNG.
DABC-SP NYC back plate with second action cover.
* MEA 38-93-E
** BSA 750-76-SA
*** ULC CS119
BNG (pictured below) uses a tension spring as a retainer.
BRG looks the same, except the retainer is a glass rod.
Overall dimensions of semi-flush mounted station:
3-1/4" (8.255 cm) wide x 4-3/4" (12.065 cm) high x
7/8" (2.222 cm) deep.