Notifier B401BHA - Manual (Page 2)

Page 2 of 2 — DN-4786:A1 • 1/7/10
NOTIFIER® and System Sensor® are registered trademarks of Honeywell
International Inc.
©2007 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Maximum ripple voltage: 10% of supply voltage.
Startup capacitance: 200 μF. Agency Listings and Approvals
These listings and approvals apply to the B401BH(A). In
some cases, certain modules or applications may not be
listed by certain approval agencies, or listing may be in pro-
cess. Consult factory for latest listing status.
•
UL Listed: file S911.
• ULC Listed: file S911.
• CSFM approved: file 7300-1653:109.
• Maryland State Fire Marshal approved: Permit # 1985.
• MEA approved: file 205-94-E.
Product Line Information
B401BH: Sounder base assembly, includes pre-assembled
sounder and B401 base.
B401BHA: Same as above with ULC listing.
B401: Plug-in flangeless base for 400 Series detectors.
B401A: Same as above with ULC listing.
Face of B401BH(A) detector base
with sounder
Back of detector base with sounder
4786d1.wmf 4786d2.wmf